PLYMOTH 240V MOBILE FILTER W/ 2MTR ARM
Plymoth A-540KIT Mobile Fume Extraction Unit with 2m Arm — 240V
Overview
The Plymoth A-540KIT Mobile Fume Extraction Unit is a self-contained, wheel-mounted system for capturing weld smoke, gases, light dust and non-explosive dust particles at the source — before they reach the welder's breathing zone. Unlike a fixed wall-mounted fan and arm setup, the A-540KIT is built to move with the work: roll it between bays or workstations as needed, with no fixed ducting or mounting required.
The washable cartridge filter delivers over 99.9% separation efficiency, and being washable rather than disposable keeps ongoing filter costs down over the unit's service life. The included 2m internally supported extraction arm swivels a full 360° and retracts to suit the job, giving a 2-metre working radius that covers most single-station welding tasks, with a volume control damper on the hood to adjust airflow as the task demands.
Running on standard 240V single-phase power with a 4m, 15A cable included, the A-540KIT is ready to plug in and use — a practical, portable way to bring at-source local exhaust ventilation (LEV) into a workshop, supporting compliance with AS/NZS ISO 21904 and Australia's tightened welding fume Workplace Exposure Standards (WES).
Key features
- Mobile, self-contained unit — four smooth-rolling castors (two with integrated safety brakes) and ergonomic push handles for easy repositioning between bays
- Washable cartridge filter, >99.9% separation efficiency, with low ongoing maintenance costs
- 2m internally supported extraction arm, fully retractable with 360° swivel for a 2-metre working radius
- Volume control damper built into the hood, for adjusting airflow to suit the task
- 240V single-phase power, plug-and-play with a heavy-duty 4m, 15A cable included
- Supports compliance with Australia's 2024 welding fume exposure standards
What's included
- Extraction unit
- Pre-installed cartridge filter
- Dust collection tray
- 2m arm assembly
- 4m, 15A electrical cable and plug
Specifications
| Spec | Detail |
|---|---|
| Part number | A-540KIT |
| Power supply | 240V, single-phase |
| Cable | 4m, 15A, plug included |
| Extraction arm | 2m, internally supported, 360° swivel |
| Filtration | Washable cartridge filter, >99.9% separation efficiency |
| Mobility | 4 castors (2 braked), push handles |
Typical applications
Welding workshops, fabrication bays, training facilities, and light industrial dust extraction where a portable, at-source extraction point is needed across multiple work areas.
Frequently Asked Questions
Does the A-540KIT need to be ducted or fixed to a wall? No — it's a fully mobile, self-contained unit on castors. It filters air and returns it to the room, with no ducting or wall mounting required.
How far does the extraction arm reach? The included arm gives a 2-metre working radius, with a full 360° swivel and retractable positioning for flexibility around the weld joint.
Does the filter need regular replacement? The cartridge filter is washable rather than disposable, so it can be cleaned and reused rather than replaced on a fixed schedule, keeping ongoing running costs down.
What power does the A-540KIT run on? Standard 240V single-phase power, supplied with a 4m, 15A cable and plug — ready to use straight out of the box.
Can airflow be adjusted for different tasks? Yes — the hood has a built-in volume control damper, so airflow can be tuned to suit lighter or heavier fume-generating tasks.