MOUNTED ABRASIVES

Features Mandrels: W144 to W187 are 3.18mm diameter; W188 to W242 are 6.35mm diameter Standard pack quantity: 10 mounted p...

Features Mandrels: W144 to W187 are 3.18mm diameter; W188 to W242 are 6.35mm diameter Standard pack quantity: 10 mounted p...

Features High quality general purpose mounted points Extensive shape availability Applications Suitable for use...

High stock removal rate due to aggressive abrassive materials. The textile elements wear off uniformly and without residue on the ...

Cotton backing. Comfortable, stable grinding. Suitable for use on difficult to access areas, such as pipes, moulds, matrixes and m...

Design to deliver a consistent finish with a uniform rate of cut, flap wheels have a continual rate of wear which exposes new abrasive. Th...

Cotton backing. Comfortable, stable grinding. Suitable for use on difficult to access areas, such as pipes, moulds, matrixes and m...

Design to deliver a consistent finish with a uniform rate of cut, flap wheels have a continual rate of wear which exposes new abrasive. Th...

For aggressive grinding achieving maximum stock removal on hard , poorly heat-conducting materials . Active additives in the coati...

For aggressive grinding achieving maximum stock removal on hard , poorly heat-conducting materials . Active additives in the coati...

Abrasive spiral bands CO-COOL For highly-abrasive grinding with maximum stock removal on hard, poor heat conducting materials whic...

Abrasive spiral bands CO-COOL For highly-abrasive grinding with maximum stock removal on hard, poor heat conducting materials which do not...

The zirconia alumina type is intended for maximum stock removal. The exceptionally aggressive cutting properties of zirconia aluminia eff...

The Z-COOL type is characterised by its particularly cool grinding qualities. It does not clog up and is mainly used for work on stainles...

The Z-COOL type is characterised by its particularly cool grinding qualities. It does not clog up and is mainly used for work on stainles...

COMBIDISC® fleece pads PNER are used for end grinding on angle grinders. CDR fastening elements are bonded to the unitized fleece. They a...

The Z-COOL type is characterised by its particularly cool grinding qualities. It does not clog up and is mainly used for work on s...

The Z-COOL type is characterised by its particularly cool grinding qualities. It does not clog up and is mainly used for work on s...

The Z-COOL type is characterised by its particularly cool grinding qualities. It does not clog up and is mainly used for work on s...

The aluminium oxide A type is suitable for general applications from fine to finest grinding on metals and other materials. Abrasive...