Weldmax premium quality 309LSi is a low carbon 24% Chromium / 13% Nickel stainless steel wire for the Gas Metal Arc Welding (GMAW) of matching 309L...
This wire, due to its lower carbon content, will be less susceptible to intergranular corrosion caused by carbide precipitation when used ...
This wire, due to its lower carbon content, will be less susceptible tointergranular corrosion caused by carbide precipitation when used i...
Wires of these types can be used for welding 304 stainless steel. Thechromium and nickel contents are identical. The lower carbon content ...
Description for the 309LSI wire: 309LSi is a premium quality, low carbon 24% Cr / 13% Ni stainless steel wire for the Gas Metal Arc Welding (G...
Suitable for welding all stainless steels. Provides stable arc, excellent penetration, good weld pool fluidity and flat weld bead ...
307 is a high manganese austenitic stainless steel used for joining and surfacing applications involving work-hardenable steels, armour pl...
308L (including ER308LSi) is predominately used on austenitic stainless steels, such as types 301, 302, 304, 305 and cast alloys CF-8 and ...
DESCRIPTION Rutile flux cored stainless steel wire for gas shielded arc welding 24% chromium - 13% nickel - low carbon deposit ...
Alloy ER 347 is a columbium-stabilized stainless steel welding wire used to weld Types 321 and 347. Addition of columbium reduces the possib...
Marine Grade Quality Suitable for welding 300 series Marine Grade stainless steels. Provides good arc characheristics, weld pool f...
Marine Grade Quality Suitable for welding 300 series Marine Grade stainless steels. Provides good arc characteristics, weld pool fluidity and flat...
General Verti-Cor 309LT is a gas shielded stainless steel flux cored wire developed for a wide range of positional and downha...
This product is priced “per KG”. The minimum quantity available to purchase is shown in the "Pack Qty".
Top Features The weld deposits exhibit high tensile strength and offer some resistance to abrasion Applications should be limited ...
Applications Superduplex stainless steel pipe, plate, fittings and forgings have an approximate 50:50 microstructure of austenite with ...
GTAW Bare, corrosion-resistant, chromium-nickel-molybdenum rods for the GTA welding of austenitic chromium-nickel alloys of the 18% Cr-8%...
308L (including ER308LSi) is predominately used on austenitic stainless steels, such as types 301, 302, 304, 305 and cast alloys CF-8 and CF-3. For...
Application ER347 is recommended for welding AISI 347 and 321. The weld metal has good resistance to general corrosion. ER347 is suit...