GULLCO OVEN IN-SHOP 350 159KG

GULLCO IN-SHOP 350 ELECTRODE STABILIZING OVEN – 159KG CAPACITY

Part No: OVEN350

The Gullco In-Shop 350 is a 159kg-capacity electrode stabilizing oven designed to keep low-hydrogen stick electrodes and welding fluxes dry, conditioned, and code-compliant. With a thermostat-controlled temperature range of 37.8°C to 287.8°C, fully insulated construction, and a compact stackable footprint of 559 x 559 x 610mm, it's built for fabrication workshops, pressure vessel and pipe fabricators, and any operation where hydrogen-controlled welding consumables are a compliance requirement — not an option.

Gullco stabilizing ovens have earned international recognition and acceptance across structural steel, oil and gas, and heavy fabrication industries. The In-Shop 350 is the workshop-scale model in the range, sized for serious daily consumable throughput without the footprint of a floor-standing holding oven.

Why Electrode Storage Matters

Low-hydrogen electrodes (E7016, E7018, E8018 and similar) absorb atmospheric moisture the moment their packaging is opened. That moisture introduces diffusible hydrogen into the weld, which is a leading cause of hydrogen-induced cracking (HICC) in high-strength and thick-section welds. Australian fabrication codes, including AS/NZS 1554 structural welding requirements, expect hydrogen-controlled consumables to be stored and re-conditioned at manufacturer-specified temperatures.

A dedicated stabilizing oven like the Gullco 350 maintains electrodes at holding temperature between the flux drying stage and the welding arc — protecting weld quality, keeping procedures qualified, and eliminating the cost of discarding moisture-exposed consumables.

Key Features

Thermostat control with on/off switch — Maintains oven temperature anywhere in the 37.8°C to 287.8°C range, covering both long-term holding temperatures and elevated conditioning requirements for most low-hydrogen electrode classifications.

Fully insulated cabinet — Prevents heat loss for stable internal temperature and lower running costs, with a pilot light indicating oven operation at a glance.

Compact, modular, stackable design — Nesting feet and sockets allow multiple ovens to be safely and easily stacked, so capacity can grow vertically without consuming additional floor space. Controls are recessed into the cabinet for protection in busy workshop environments.

Removable shelves — Shelves lift out easily to accommodate large or irregular loads, including flux containers and oversized consumable packaging.

Dual voltage operation — Runs on 115V or 220V AC, with a generous 2428mm line cord for flexible placement in the workshop.

Push/pull door latch — Simple, positive closure that stands up to constant daily access.

Specifications

Note: usable weight capacity varies with electrode length and load configuration.

Who Is the Gullco 350 Oven For?

• Structural steel and general fabrication workshops running low-hydrogen electrodes to AS/NZS 1554 requirements
• Pressure vessel and pipe fabricators where hydrogen control is written into qualified welding procedures
• Mining, earthmoving and heavy repair operations using hardfacing and low-hydrogen maintenance electrodes
• Workshops storing sub-arc fluxes and other moisture-sensitive consumables that require conditioned storage

At 159kg capacity, the In-Shop 350 suits workshops with multiple welders drawing electrodes throughout the shift. For smaller crews or site work, ask us about compact portable models — and for higher-volume operations, ovens can be stacked to scale capacity.

Frequently Asked Questions

What temperature should low-hydrogen electrodes be stored at? Most manufacturers specify holding temperatures between 100°C and 150°C for opened low-hydrogen electrodes, with higher re-conditioning temperatures if electrodes have been exposed to atmosphere. The Gullco 350's 37.8°C to 287.8°C thermostat range covers holding requirements for common classifications — always confirm against the electrode manufacturer's datasheet.

Can the Gullco 350 be used for welding flux as well as electrodes? Yes. With removable shelves and a 356 x 405 x 482mm internal chamber, the oven accommodates flux containers and other moisture-sensitive consumables, not just stick electrodes.

What length of electrode fits in the Gullco 350? The oven accepts electrodes up to 457mm in length, covering standard 350mm and 450mm stick electrode sizes.

Can I stack multiple Gullco 350 ovens? Yes. The In-Shop 350 features nesting feet and sockets designed for safe, stable stacking, letting you expand conditioned storage capacity without expanding floor space.

Does the Gullco 350 run on standard Australian power? The oven operates on 115V or 220V AC. Contact our team to confirm the correct configuration for your workshop supply.