BINZEL SUCTION NOZZLE STANDARD PRO 24
Volume Discounts for ABN / Account holders -
Availability: 3 In stock, ready to be shipped!
Abicor Binzel Fume Extraction Nozzle — Tapered, xFume Pro 24 Torch
Overview
The Abicor Binzel Fume Extraction Nozzle is the tapered replacement nozzle/shroud for the xFume Pro 24 air-cooled fume extraction MIG torch. It's a wear part — the extraction nozzle sits at the front of the torch and is what actually captures weld fume at the arc before it's drawn back through the torch body to the vacuum/filter system, so it takes the brunt of spatter and heat exposure during welding and needs periodic replacement to keep on-torch extraction working effectively.
Binzel engineers the nozzle's standoff distance carefully: positioned too close to the workpiece, it pulls the shielding gas envelope away with the fume and causes porosity; positioned too far away, fume capture efficiency drops off. The tapered 600.0148.1 nozzle is built to Binzel's optimised geometry for the xFume Pro 24, so replacing a worn or damaged nozzle with the correct genuine part keeps both shielding gas coverage and fume extraction performing as designed.
On-torch extraction systems like the xFume Pro 24 are a practical way to bring source-capture fume control right to the arc, supporting compliance with AS/NZS ISO 21904 and Australia's tightened welding fume Workplace Exposure Standards (WES) — particularly useful on long seams, in confined spaces, or wherever a fixed extraction arm isn't practical.
Key features
- Genuine Abicor Binzel replacement part for the xFume Pro 24 air-cooled fume extraction MIG torch
- Tapered nozzle profile, engineered to Binzel's optimised standoff geometry for effective fume capture without disrupting shielding gas flow
- Wear part — designed for periodic replacement as part of routine torch maintenance
- Supplied as singles
Compatibility
| Compatible with |
|---|
| Abicor Binzel xFume Pro 24 Air Cooled Fume Extraction MIG Torch (270A) |
Refer to the xFume Pro 24 wear parts breakdown for correct nozzle selection and fitment.
Related parts
- Abicor Binzel xFume Pro 24 Torch Nozzle Spatter Protector (5-Pack) (146.0091.5) — fits over the extraction nozzle to reduce spatter build-up and extend service life
- Abicor Binzel xFume Pro 24 Air Cooled Fume Extraction MIG Torch (270A, 3/4/5m lengths) — the torch this nozzle is designed for
- Abicor Binzel FEX PRO Portable Fume Extractor — pairs with xFume torches for a complete on-torch extraction system
Frequently Asked Questions
Why does the extraction nozzle need to be replaced? It's a wear part exposed directly to weld spatter and heat at the front of the torch. A worn, deformed or clogged nozzle disrupts both fume capture efficiency and shielding gas coverage, so it should be replaced as part of routine torch maintenance.
Does nozzle standoff distance actually matter? Yes. Abicor Binzel optimises the nozzle position on xFume torches deliberately: too close to the workpiece and it extracts shielding gas along with the fume, causing porosity; too far away and fume removal becomes less effective. The 600.0148.1 tapered nozzle is built to that engineered geometry.
What torch does this nozzle fit? The Abicor Binzel xFume Pro 24 Air Cooled Fume Extraction MIG Torch, rated to 270A.
How is this nozzle supplied? As a single unit.
Is there anything to protect the nozzle from spatter build-up? Yes — the xFume Pro 24 Torch Nozzle Spatter Protector (5-pack, part 146.0091.5) fits over the extraction nozzle and helps extend its service life between replacements.
