USED WELDMAX 225 PULSE MIG/TIG/MMA INVERTER

Description

The Weldmax 225 Double Pulse Mig is a microprocessor-controlled multi-process welding inverter suitable for MIG/MAG (manual, synergic, or pulsed or Double pulse MIG welding), TIG-DC (continuous or pulsed), and MMA welding. The large 85mm display shows all the welding parameters and makes settings easy and intuitive.

In synergic MIG/MAG welding, the microprocessor ensures easy and quick setting of the programs thus always guaranteeing optimal arc stability and the highest weld quality. MIG-MAG features: DC controlled or pulsed welding using pre-set synergic curves, program storage of your own custom weld parameters, 2T/4T & spot trigger function, pre-gas & post-gas time regulation, electronic reactance, soft start, burn-back time, hot start, slope down, crater fill. 

225 Pulse Applications

The Weldmax 225 PULSE is the answer when welding aluminum, steel, stainless, and CrNi using 240volt power. For those who build boats, trailers, tanks, or are in the field, the Weldmax 225 inverter is lightweight and can be used either manually or utilise the pre-programmed settings that allow very fast set up and perfect operation of the welding arc. With a large digital display – this intuitive welder is set to impress the best fabricators, sheet metals workers, boilermakers and all the boat builders.

The Weldmax 225 model is the wheel-mounted version, is highly mobile, and accepts both the 300mm and 200mm wire spools. The Weldmax 220 and 225 Pulse MIGs require a TIG torch with a trigger, no valve is required as the welder has an internal solenoid. Once the trigger is pressed, you just touch the tungsten on the workpiece to activate the Lift-Arc ignition. Upon completion of the weld, release the trigger, and slope down will activate or the weld will just stop if slope down is not turned on.

Technical Specifications 

• Current range MIG/MMA/TIG: 20 – 200 Amps
• Welding Current at 35% ED (40°C) – MIG/ MAG/ MMA: 200 Amps
• Welding Current at 100% ED (40°C) – MIG: 140 Amps
• Welding Current at 100% ED (40°C) – MMA/ TIG: 120 Amps
• Power Supply: AC 230V
• Open-circuit Voltage: 65V
• Wire Feed rollers: 4
• Wire Speed: 0-24 m/min
• Wire Diameter Steel/ Inox/ alu: 0.8 – 1.2mm
• Electrode Diameter: 2.5 – 4.0mm
• Protection rating: IP225
• Weight: 41kg
• Dimensions (mm): 685 x 295 x 395