Pferd

Suitable for aggressive grinding on all materials. They are particularly well suited to edge grinding and weld removal Suitable for use o...

High stock removal rate due to aggressive abrassive materials. The textile elements wear off uniformly and without residue on the ...

Cylindrical burr shape ZYA Similar to cut 3, but with cross cut. Suitable for high coarse stock removal on cast iron, steel < 60 HRC,...

Handy for use on slots, keyways, rectangular or square holes and for surface work, this file has four equal sides. Double cut, it tapers ...

Aggressively working brush. Suitable for medium-duty brushing such as deburring, cleaning and rust removal. Can be used particularly well in hard-...

PFERD tungsten carbide burrs are designed for machining materials of virtually any strength.The perfect combination of tungsten carbide, shape and ...

General-use shape (combination of cylindrical and ball shapes). Cylindrical shape with radius end according to DIN 8032 with cut conforming to DIN ...

General-use shape (combination of cylindrical and ball shapes). Cylindrical shape with radius end and cut. Burrs with ALU cut are non-regrindable....

This popular machinist file is designed for enlarging circular holes or rounded grooves that are too small for a half round file. It tapers toward...

High stock removal rate due to aggressive abrassive materials. The textile elements wear off uniformly and without residue on the ...

Tree shape with radius end burr according to DIN 8032 with cut conforming to DIN 8033. Original PFERD product quality High stock removal rate ...

High stock removal rate due to aggressive abrassive materials. The textile elements wear off uniformly and without residue on the material...

Accessory for mounting small cut-off wheels on straight grinders. Rugged PFERD product with maximum shank fracture resistance. Recommen...

Conical shape burr with radius end according to DIN 8032 and with cut conforming to DIN 8033. Burrs with ALU cut are non-regrindable. Angle  = 14...

POLICAP® abrasive caps  have a seamless shape. The entire tool surface can be used during grinding. The abrasive caps sit securely on the holders d...

Tapered in width at the point and slightly tapered in thickness at the point, flat files are double cut on both sides and are single cut o...

PFERD tungsten carbide burrs are designed for machining materials of virtually any strength.The perfect combination of tungsten carbide, shape and ...

Abrasive sheets, aluminium oxide A type: Low-price alternative for normal workloads when working on painted wooden and metal surfa...

Ideal for use in heavy brushing work for pipeline and container construction. This extra slim brush design is perfect for work in hard-to...

Oval burr with cut Features : Tungsten Carbide burrs are designed for machining material of virtuallity any strength.Their superior performance r...

These files are used for filing out concave surfaces and crevices, and for rounding out holes. The flat side of the file is double cut for...

With this special clamping flange set, only theoriginal CC-GRIND-SOLID grinding discs can be used on standard angle grinders. The...

POLIFLAP® Abrasive Flaps The POLIFLAP® wheel consists of a shank-mounted (3/8”) hub carrying an array of rubber flaps.The combination arr...

High stock removal rate due to aggressive abrassive materials. The textile elements wear off uniformly and without residue on the material...

Pointed tree shape burr according to DIN 8032 with cut conforming to DIN 8033, flattened tip. Application: Work on narrow contours  Milling of...

Cylindrical burr shape ZYA Similar to cut 3, but with cross cut. Suitable for high coarse stock removal on cast iron, steel < 60 HRC,...

Oval shape for deburring and finishing curved surfaces in steel dies, forgings, castings, and patterns, or for dressing fillet welds Alternate D...

crimped cup brushes, individual filament type Universally suitable for cleaning, rust removal, smoothing, descaling and removal of corrosi...

Conical shape burr with radius end and with cut. PFERD tungsten carbide burrs are designed for machining materials of virtually any strength. The p...

Cap holders are fully reusable. Slots in the holder facilitate its expansion, locking the tool firmly in place. The special manufa...

COMBIDISC ® Non-Woven Discs Surface Conditioning Universally suitable for surface conditioning of metals, e.g., removal of prefinishing ...

Made of several strips of corrugated non-woven material, wrapped around a common core. The wavy structure of the non-woven fabric permits...

HEAVY DUTY for Steel - High Speed Large-diameter cut-off wheels for use in stationary cutting machines.

Burrs with ALU cut are non-regrindable. Application:  Work on narrow contours

The aluminium oxide A type is suitable for general applications from fine to finest grinding on metals and other materials. Abrasive...

Cylindrical burr shape ZYA Suitable for coarse machining with high stock removal of aluminium and aluminium alloys, light metals, non-fer...

POLICLEAN® wheels For general-purpose peripheral grinding applications. Is a coarse-structured non-woven abrasive material made of a special combin...

Tapered in width at the point and slightly tapered in thickness at the point, flat files are double cut on both sides and are single cut o...

The Velcro-backed abrasive discs with suction holes are designed according to ISO 21951 shape A. 125 8L: 8 suction holes ø 10 mm, pitch ...

Scratch brushes for universal application Can be used universally for all light cleaning work and rust removel.

COMBIDISC ® Non-Woven Discs Surface Conditioning Universally suitable for surface conditioning of metals, e.g., removal of prefinishing ...

Heavy-duty “X” weight resin cloth with a special hot melt adhesive coating system produces a disc that will withstand even the mos...