BURRS, FILES & MOUNTED POINTS

PFERD tungsten carbide burrs are designed for matching materials of virtually any strength. Their superior performance reflects an optimum combina...

General-use shape (combination of cylindrical and ball shapes). Cylindrical shape with radius end according to DIN 8032 with cut conforming to DIN ...

PFERD tungsten carbide burrs are designed for matching materials of virtually any strength. Their superior performance reflects an optimum combina...

Cylindrical burr shape with end cut ZYAS and circumferential

Tree shape with radius end RBF With extreme impact resistance, these burrs also provide a high wrap angle >1/3. Suitable for machi...

Cylindrical burr with circumferential and end cut With extreme impact resistance, these burs also provide a high wrap angle >1/3. Suit...

Cylindrical burr shape ZYA Similar to cut 3, but with cross cut. Suitable for high coarse stock removal on cast iron, steel < 60 HRC,...

Conical shape burr with radius end according to DIN 8032 and with cut conforming to DIN 8033. Burrs with ALU cut are non-regrindable. Angle  = 14...

Conical shape burr with radius end according to DIN 8032 and with cut conforming to DIN 8033. Burrs with ALU cut are non-regrindable. Angle  = 14...

Pointed tree shape burr according to DIN 8032 with cut conforming to DIN 8033, flattened tip. Application: Work on narrow contours  Milling...

Cylindrical burr shape with end cut ZYAS and circumferential. Suitable for coarse machining with high stock removal of aluminium and alu...