BINZEL FEX PRO FUME EXTRACTOR POWER SOURCE ONLY

ABICOR BINZEL FEX PRO Mobile Fume Extraction Unit

Capture welding fume right at the torch with the FEX PRO — a compact, portable fume extraction unit purpose-built for TIG and light MIG source-capture applications. With a brushless motor, a cleanable pre-filter, and up to 99.5% dust capture when paired with a BINZEL fume extraction torch, it's a lightweight, low-maintenance solution for single-operator stations where mobility matters.

Why it matters

Effective source capture is the single biggest factor in reducing operator exposure to welding fume — the closer the extraction point sits to the arc, the less fume reaches the breathing zone in the first place. Pairing the FEX PRO with a fume extraction torch (rather than relying on a fixed arm alone) keeps the capture point moving with the welder, which matters for mobile or varied-position TIG and light MIG work. This kind of at-source capture supports compliance with Australia's welding fume exposure limits, which tighten further under the WES-to-WEL transition taking effect 1 December 2026.

Key features

• Purpose-built for TIG and light MIG — single-torch source extraction, not a heavy-duty MIG/MMA solution
• Lightweight, compact form factor — designed for high mobility around the workshop
• Variable flow control — precision suction adjustment on the fly via a control knob
• Brushless motor with automatic start/stop (optional) — reduces motor strain and operating cost
• Quick-service filter — four locking clips let you clean or swap the filter in minutes
• Dust collection bin — safe, contained disposal of captured fume particulate
• Turnkey pairing — designed to work with BINZEL's xFUME PRO (MIG) and xFUME TIG extraction torches

Technical specifications

Part numbers

FAQ

Does the FEX PRO need to be paired with a special torch?
It's designed to pair with BINZEL's xFUME PRO (MIG) or xFUME TIG extraction torches for a complete turnkey system and the stated 99.5% capture rate. It can be used with other extraction-capable torches, but capture performance is optimised with the xFUME range.

What's the difference between manual and automatic filter cleaning?
The FEX PRO uses a manually cleaned pre-filter with a quick-release, four-clip housing — it's designed for fast servicing rather than self-cleaning, which keeps the unit lighter and more affordable than self-cleaning cartridge systems.

Is this suitable for MIG welding?
It's rated for TIG and light MIG source extraction on a single torch — for heavier-duty or higher-volume MIG/MMA work, a higher-capacity mobile or fixed extraction system will suit better.

How noisy is it on the shop floor?
At ≤60 dB(A), it's quiet enough for shared workshop environments without requiring hearing protection specifically for the unit.