ELECTRODES

Hyundai S-NCI Cast Iron Electrodes

S-NCI can be used for repairing cast iron and joining of various kinds
of cast iron products such as cylinder covers, motor beds, casings and
gears. Repairing of meehanite, alloy and malleable cast iron.



Characteristics on usage

• S-NCI is a graphite type coated electrode, depositing
  nickel weld metal. Hardening of heat affected zone is small and
  machining of the welds is comparatively easy. Therefore it is suitable
  for welding alloy cast iron of poor weldability, malleable cast iron
  and hydraulically pressured parts as well as common cast iron.

Notes on usage

• Chip off base metal completely at the repairing part.


• There is a possibility that cracks spread or makes holes at
  both ends of repairing part.


• Keep the weld metal length less than 50mm (2 inch) to
  disperse welding heat.  Adopt back stepping stone or symmetry
  method by turns.


• Hot peen in every pass.


• The preheat temperatures vary in accordance with the size,
  kind and shape of the base metal. 150°C (302°F) is appropriate in
  general.
  
  

Welding position

• F, HV

Current

• AC or DC+

Typical Chemical Composition of all weld metal (%)

 C     
 Si     
 Mn     
 P     
 S     
 Fe     
 Ni 

 1.38     
 .79     
 .36     
 .004     
 .003     
 0.58     
 98.3 

 

Typical Mechanical Properties of all weld metal

 Preheat&InterpassTemp. °C(°F) 
     Hardness(HRB)

 –  77.6 





This product is priced “per KG”. The minimum quantity available to purchase is shown in the "Pack Qty".

Inconel Welding Electrode 112 is used for shielded-metal-arc welding of
Inconel alloy 625, Incoloy alloy 825, Incoloy alloy 25-6MO and other
molybdenum-containing stainless steels. It is used for surfacing of
steel and for welding various corrosion resistant alloys such as alloy
20.Inconel Welding Electrode 112 is useful for many dissimilar joints
involving Inconel alloys, Incoloy alloys, stainless steels, low alloy
steel and carbon steels.



The electrodes provide excellent operability for groove and fillet
welding in the down hand position and the smaller diameter electrodes
are also suitable for all position welding .Power supply: direct
current, electrode positive.



Specifications

UNS W86112, Werkst.Nr.2.4621, AWS A5.11, ENiCrMo-3







This product is priced “per KG”. The minimum quantity available to purchase is shown in the "Pack Qty".

Inconel Welding Electrode 112 is used for shielded-metal-arc welding of
Inconel alloy 625, Incoloy alloy 825, Incoloy alloy 25-6MO and other
molybdenum-containing stainless steels. It is used for surfacing of
steel and for welding various corrosion resistant alloys such as alloy
20.Inconel Welding Electrode 112 is useful for many dissimilar joints
involving Inconel alloys, Incoloy alloys, stainless steels, low alloy
steel and carbon steels.



The electrodes provide excellent operability for groove and fillet
welding in the down hand position and the smaller diameter electrodes
are also suitable for all position welding .Power supply: direct
current, electrode positive.



Specifications

UNS W86112, Werkst.Nr.2.4621, AWS A5.11, ENiCrMo-3







This product is priced “per KG”. The minimum quantity available to purchase is shown in the "Pack Qty".

Hyundai S-6010.D Cellulose Electrodes

S-6010.D can be used for welding of pipes, storage tanks, pressure
vessels, cast steel repairs, machines and heavy construction works.



Characteristics on usage

• S-6010.D is a high cellulose type electrode for welding in
  all positions including vertical-down using DC (+).  S-6010.D
  exhibits deep penetration and fast freezing.

Notes on usage

• Pay attention not to use currents exceeding the recommended
  currents.


• As this electrode is prone to absorb moisture, store it
  with care.
  
  

Welding position

• VU, VD

Current

• DC+

Typical Chemical Composition of all weld metal (%)

 C       Si
      Mn
      P
      S  

 .10       .17
      .42
      .015
      .017  

 

Typical Mechanical Properties of all weld metal

 Y.S N/mm2 (lbs/in2)      
T.S  N/mm2 (lbs/in2)      
EL. (%)     Temp.   °C
(°F)       CVN-Impact
Value  J (ft. lbs)  

 447 (64,900)       517
(75,000)       32.3
      -29 (-20)
      62 (46)  

 

Approval

KR, ABS, LR, BV, DNV, GL, NK, CWB 




This product is priced “per KG”. The minimum quantity available to purchase is shown in the "Pack Qty".

A universal electrode which has medium-heavy rutile coating, which
yields a fairly rapid solidifying slag. It

is very easy to apply in the vertical up and overhead positions, where
a short arc length is benefi cial. The

weld appearance is very good for all positions. has excellent
X-Ray properties.





This product is priced “per KG”. The minimum quantity available to purchase is shown in the "Pack Qty".

Features

• General purpose versatile electrode

Applications

• Suitable for all-positional welding of thin steel sections
  and welding joints with poor fit-up

Specifications

• Classification: AS/NZS 4855 – B-E43 13 A (AS/NZS 1553.1
  E4112-0 Previous Classification)

E7024 is an excellent high-speed electrode for fillet welds. It is
exceptionally fast when used down hand in properly designed weld joints
or in horizontal fillet welds where equal leg fillets are desired. The
arc force of Alloys E7024 minimizes slag entrapment and the slag is
self-removing in most applications. E7024 is an excellent
choice for earthmoving equipment, railroad cars, mining machinery,
structurals, plate fabrication, shipbuilding, and mobile trailers.



FEATURES:

• High deposition


• Uses drag welding technique


• Self-removing slag


• Meets E7024-1 specifications
  
  

BENEFITS:

• Faster travel speed


• Easy to use


• Easy clean up


• Can be used wherever an E7024 or E7024-1 is called for
  
  

This product is priced “per KG”. The minimum quantity available to purchase is shown in the "Pack Qty".

Deposits of Duralloy D electrodes possess the highest hardness of any
iron base alloy; as deposited Rockwell C hardness for two layer
deposits is 62 to 64. This super alloy has a highly refined grain
structure which will resist virtually any abrasive materials.




This product is priced “per KG”. The minimum quantity available to purchase is shown in the "Pack Qty".

This product is priced “per KG”. The minimum quantity available to purchase is shown in the "Pack Qty".

E7024 is an excellent high-speed electrode for fillet welds. It is
exceptionally fast when used down hand in properly designed weld joints
or in horizontal fillet welds where equal leg fillets are desired. The
arc force of Alloys E7024 minimizes slag entrapment and the slag is
self-removing in most applications. E7024 is an excellent
choice for earthmoving equipment, railroad cars, mining machinery,
structurals, plate fabrication, shipbuilding, and mobile trailers.



FEATURES:

• High deposition


• Uses drag welding technique


• Self-removing slag


• Meets E7024-1 specifications
  
  

BENEFITS:

• Faster travel speed


• Easy to use


• Easy clean up


• Can be used wherever an E7024 or E7024-1 is called for
  
  

This product is priced “per KG”. The minimum quantity available to purchase is shown in the "Pack Qty".

This product is priced “per KG”. The minimum quantity available to purchase is shown in the "Pack Qty".

Hyundai Electrode S-6013.LF is a low fume, high titania type electrode
of which fume generation is about 20% less than conventional high
titania type electrodes and whose usability is excellent in all
position welding. S-6013 LF is suitable for welding of light structural
steels because of its stable arc, shallow penetration and smooth
welding bead.

• General Purpose Rutile Type Electrode


• Versatile/All Positional Capabilities Including Vertical
  Down


• Smooth Performance on Low OCV AC Welding Machines
  
  

Application

• S-6013LF can be used for welding of machinery, vehicles and
  light structural steels, and surface dressing of heavy steel structures.
  
  

This product is priced “per KG”. The minimum quantity available to purchase is shown in the "Pack Qty".

APPLICATIONS

• S-6013.V can be used for welding of steel sheet structures
  in ships, railway vehicles, and cars, surface dressing of heavy steel
  structures. Filling up welding of cast steel.

CHARACTERISTICS ON USAGE:

• S-6013.V is a Rutile-Cellulose type electrode, remarkably
  improved in workability. This electrode is sutiable for welding of
  small thin pipes. It is also sutiable for vertical-down welding.
  
  

NOTES ON USAGE:

• In case of vertical downward welding, manipulate the
  electrode, keeping its tip in contact with base metal as shown in the
  sketch.


• Dry the electrodes at 70~100? (158~212?) for 30~60 minutes
  before use
  
  

This product is priced “per KG”. The minimum quantity available to purchase is shown in the "Pack Qty".

E7024 is an excellent high-speed electrode for fillet welds. It is
exceptionally fast when used down hand in properly designed weld joints
or in horizontal fillet welds where equal leg fillets are desired. The
arc force of Alloys E7024 minimizes slag entrapment and the slag is
self-removing in most applications. E7024 is an excellent
choice for earthmoving equipment, railroad cars, mining machinery,
structurals, plate fabrication, shipbuilding, and mobile trailers.



FEATURES:

• High deposition


• Uses drag welding technique


• Self-removing slag


• Meets E7024-1 specifications
  
  

BENEFITS:

• Faster travel speed


• Easy to use


• Easy clean up


• Can be used wherever an E7024 or E7024-1 is called for
  
  

This product is priced “per KG”. The minimum quantity available to purchase is shown in the "Pack Qty".

This type is formulated for a deeply penetrating arc with fast burn-off
rate. It is used primarily for welding pipe, using the stove-pipe
technique. PH31A has good mechanical and X-ray characteristics. A touch
technique or a short arc are the main requisites, depending upon the
welding conditions.





This product is priced “per KG”. The minimum quantity available to purchase is shown in the "Pack Qty".

Rutile coated electrode with a fast solidifying slag and a low amount
of spatter. All-position welding with particularly satisfactory results
in the vertical down welding. Good on rust and paint covered plates.
Application in ship-building and general constructional structures.




This product is priced “per KG”. The minimum quantity available to purchase is shown in the "Pack Qty".

Rutile coated electrode with a fast solidifying slag and a low amount
of spatter. All-position welding with particularly satisfactory results
in the vertical down welding. Good on rust and paint covered plates.
Application in ship-building and general constructional structures.




This product is priced “per KG”. The minimum quantity available to purchase is shown in the "Pack Qty".

APPLICATIONS

• S-6013.V can be used for welding of steel sheet structures
  in ships, railway vehicles, and cars, surface dressing of heavy steel
  structures. Filling up welding of cast steel.

CHARACTERISTICS ON USAGE:

• S-6013.V is a Rutile-Cellulose type electrode, remarkably
  improved in workability. This electrode is sutiable for welding of
  small thin pipes. It is also sutiable for vertical-down welding.
  
  

NOTES ON USAGE:

• In case of vertical downward welding, manipulate the
  electrode, keeping its tip in contact with base metal as shown in the
  sketch.


• Dry the electrodes at 70~100? (158~212?) for 30~60 minutes
  before use
  
  

This product is priced “per KG”. The minimum quantity available to purchase is shown in the "Pack Qty".

Rutile coated electrode with a fast solidifying slag and a low amount
of spatter. All-position welding with particularly satisfactory results
in the vertical down welding. Good on rust and paint covered plates.
Application in ship-building and general constructional structures.




This product is priced “per KG”. The minimum quantity available to purchase is shown in the "Pack Qty".

APPLICATIONS

• S-6013.V can be used for welding of steel sheet structures
  in ships, railway vehicles, and cars, surface dressing of heavy steel
  structures. Filling up welding of cast steel.

CHARACTERISTICS ON USAGE:

• S-6013.V is a Rutile-Cellulose type electrode, remarkably
  improved in workability. This electrode is sutiable for welding of
  small thin pipes. It is also sutiable for vertical-down welding.
  
  

NOTES ON USAGE:

• In case of vertical downward welding, manipulate the
  electrode, keeping its tip in contact with base metal as shown in the
  sketch.


• Dry the electrodes at 70~100? (158~212?) for 30~60 minutes
  before use
  
  

This product is priced “per KG”. The minimum quantity available to purchase is shown in the "Pack Qty".

Features

• Versatile general purpose mild steel electrode is a high
  Titania type covered electrode


• Vertical down welding up to 5mm welding rod


• Very stable arc with little spatter gives it a lustrous bead
  
  

Specifications

• Classification: AWS A5.I E6013


• Recommended currents AC, DC-EP or DC-EN
  
  

This product is priced “per KG”. The minimum quantity available to purchase is shown in the "Pack Qty".

Versatile enough to be used in all positions, including vertical down,
Murex Speedex 12 manual arc electrodes ensure a smooth, quiet arc with
low spatter.

• User friendly E4112/E6013 electrode


• Suitable for welding mild and sheet steel and galvanised
  iron


• Smooth quiet arc with low spatter
  
  

Recommended Use

• General worshop, field and strutural welding of mild steel
  or galvanised steel components

This product is priced “per KG”. The minimum quantity available to purchase is shown in the "Pack Qty".

http-equiv="content-type">



Features

• Versatile general purpose mild steel electrode is a high
  Titania type covered electrode


• Vertical down welding up to 5mm welding rod


• Very stable arc with little spatter gives it a lustrous bead
  
  

Specifications

• Classification: AWS A5.I E6013


• Recommended currents AC, DC-EP or DC-EN

This product is priced “per KG”. The minimum quantity available to purchase is shown in the "Pack Qty".

Double coated low hydrogen electrode. Stable arc also when used

with
low open circuit voltage, both in D.C, and A.C.; spatter-free,
excellent appearance and good mechanical properties up to -20°C.

The
excellent weldability properties of this unique electrode approach
those of a rutile type.



Storage, preservation, redrying

• To obtain 5-10 ml H2/100 gr of weld metal, dry at 250-300°C
  for one hour, max 5 times. Keep dry and store at room temperature.
  
  Once
  opened, store at 90-150°C until use.

This product is priced “per KG”. The minimum quantity available to purchase is shown in the "Pack Qty".