{"product_id":"xdp905-cutting-paste-500g-tub","title":"XDP905 CUTTING PASTE 500G TUB","description":"\u003ch4 dir=\"ltr\"\u003e\u003cstrong\u003eExcision XDP905 Cutting \u0026amp; Tapping Paste\u003c\/strong\u003e\u003c\/h4\u003e\r\n\u003cp dir=\"ltr\"\u003eExcision XDP905 Paste is a heavy-duty cutting and tapping paste for high-pressure machining: tapping, drilling, reaming and broaching in steel, stainless and other hard metals. It’s a thick paste that clings to the tool, so it stays in the cut where liquid oils run off or burn away. This keeps the cutting edge lubricated under load, reduces friction and heat, and extends the life of taps and drill bits. The 500g tub has a wide opening, so you can dip a tap or cutter straight in. That makes it the practical choice for fabrication shops, maintenance workshops and machine shops doing a lot of tapping and drilling.\u003c\/p\u003e\r\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eWhy Use a Paste Instead of a Cutting Oil?\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp dir=\"ltr\"\u003eTapping and drilling put heavy pressure on a small cutting edge, and that’s where liquid lubricants break down first. XDP905 Paste has high film strength and extreme-pressure (EP) properties, so the lubricating layer between the tool and the workpiece holds when the torque is highest. That matters most when you are:\u003c\/p\u003e\r\n\u003cul dir=\"ltr\"\u003e\r\n\u003cli\u003eHand or machine tapping blind holes, where oil drains away before it can help\u003c\/li\u003e\r\n\u003cli\u003eDrilling vertical or overhead surfaces with a magnetic drill, where oil runs straight off\u003c\/li\u003e\r\n\u003cli\u003eCutting stainless steel and tough alloys that work-harden and wear out tooling\u003c\/li\u003e\r\n\u003cli\u003eReaming or broaching where you need a good surface finish\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eExtreme-pressure film strength\u003c\/strong\u003e: The lubricating film stays intact under the heavy loads of tapping and drilling. This reduces galling, chipped threads and broken taps.\u003c\/p\u003e\r\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eHigh adhesion\u003c\/strong\u003e: The paste stays on the tool and in the hole. It suits vertical and overhead work, and blind holes where a liquid would drain out.\u003c\/p\u003e\r\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eLonger tool life\u003c\/strong\u003e: Lower friction and heat at the cutting edge keep taps, drills and annular cutters sharp for longer. That means fewer tooling changes and more uptime.\u003c\/p\u003e\r\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eCorrosion protection and anti-seize\u003c\/strong\u003e: The paste resists water and leaves a protective film on finished threads and bores. This helps prevent rust and seizing.\u003c\/p\u003e\r\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eHigh residual lubrication\u003c\/strong\u003e: A light film stays on the part after machining, which makes it easier to run in fasteners.\u003c\/p\u003e\r\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eDip tub for workshop use\u003c\/strong\u003e: Dip the tool straight in for quick, full coverage between holes. A 500g tub lasts a long time at a busy tapping or drilling station.\u003c\/p\u003e\r\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eWorkshop Safety \u0026amp; Compliance\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp dir=\"ltr\"\u003eAccording to Excision’s Safety Data Sheet, which is prepared under the Model WHS Regulations, XDP905 Paste is \u003cstrong\u003enot classified as hazardous\u003c\/strong\u003e. It is \u003cstrong\u003enot regulated as a dangerous good\u003c\/strong\u003e for road, sea or air transport, and it is \u003cstrong\u003eunscheduled\u003c\/strong\u003e under the SUSMP. Its flash point is above 260 °C. This makes it simple to add to your workshop chemical register and easy to store with your other consumables. Normal good practice still applies: work in a ventilated area, wear gloves for repeated contact, and wear eye protection suited to the task.\u003c\/p\u003e\r\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eTechnical Specifications\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cdiv dir=\"ltr\"\u003e\r\n\u003ctable\u003e\r\n\u003cthead\u003e\r\n\u003ctr\u003e\r\n\u003cth scope=\"col\"\u003eSpecification\u003c\/th\u003e\r\n\u003cth scope=\"col\"\u003eDetail\u003c\/th\u003e\r\n\u003c\/tr\u003e\r\n\u003c\/thead\u003e\r\n\u003ctbody\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003ePart number\u003c\/td\u003e\r\n\u003ctd\u003e83905-500\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003ePack size\u003c\/td\u003e\r\n\u003ctd\u003e500g tub\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eApplication\u003c\/td\u003e\r\n\u003ctd\u003eCutting, drilling, tapping, reaming\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eForm\u003c\/td\u003e\r\n\u003ctd\u003ePaste, light brown\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eFlash point\u003c\/td\u003e\r\n\u003ctd\u003e\u0026gt; 260 °C\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eDensity\u003c\/td\u003e\r\n\u003ctd\u003e0.935 g\/cm³\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eViscosity\u003c\/td\u003e\r\n\u003ctd\u003e1,196 cP at 25 °C\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eSolubility\u003c\/td\u003e\r\n\u003ctd\u003eInsoluble in water, soluble in oil\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eHazard classification\u003c\/td\u003e\r\n\u003ctd\u003eNot classified (WHS Regulations)\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eDangerous goods\u003c\/td\u003e\r\n\u003ctd\u003eNot regulated (ADG \/ IMDG \/ IATA)\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003ePoisons schedule\u003c\/td\u003e\r\n\u003ctd\u003eUnscheduled\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eStorage\u003c\/td\u003e\r\n\u003ctd\u003eCool, well-ventilated area, out of direct sunlight, lid closed\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003c\/tbody\u003e\r\n\u003c\/table\u003e\r\n\u003c\/div\u003e\r\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eHow to Use\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003col dir=\"ltr\"\u003e\r\n\u003cli\u003eClean any swarf, scale and old lubricant from the tool and the workpiece.\u003c\/li\u003e\r\n\u003cli\u003eDip the cutting end of the tap, drill or cutter into the tub so the cutting edges are evenly coated. For tapping, also coat the inside of the pre-drilled hole.\u003c\/li\u003e\r\n\u003cli\u003eMachine as normal. On deep holes or long production runs, back out and re-dip as needed.\u003c\/li\u003e\r\n\u003cli\u003eWipe off any excess after machining. You can also leave a light film on the part for corrosion protection.\u003c\/li\u003e\r\n\u003cli\u003eReplace the lid after use to keep swarf and dust out of the paste.\u003c\/li\u003e\r\n\u003c\/ol\u003e\r\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eFrequently Asked Questions\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eWhat is XDP905 Paste used for?\u003c\/strong\u003e\u003cbr\u003e It’s a cutting and tapping compound for high-pressure machining, such as tapping threads, drilling, reaming and broaching. It works best on steel, stainless steel and other tough metals.\u003c\/p\u003e\r\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eCan I use XDP905 Paste with a magnetic drill?\u003c\/strong\u003e\u003cbr\u003e Yes. Because the paste is thick and sticks to the cutter, it works well for mag drilling on vertical and overhead surfaces, where liquid cutting oil would run off.\u003c\/p\u003e\r\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eIs XDP905 Paste good for tapping stainless steel?\u003c\/strong\u003e\u003cbr\u003e Yes. Its extreme-pressure film reduces friction and galling when tapping stainless steel. This helps prevent torn threads and broken taps in material that work-hardens.\u003c\/p\u003e\r\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eIs XDP905 Paste hazardous?\u003c\/strong\u003e\u003cbr\u003e No. Excision’s SDS states it is not classified as hazardous under Australian WHS Regulations, not regulated as a dangerous good for transport, and unscheduled under the SUSMP.\u003c\/p\u003e\r\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eShould I buy the tub or the tube?\u003c\/strong\u003e\u003cbr\u003e The 500g tub is the better value for workshops doing a lot of tapping and drilling, because you can dip tools straight in. The 200g tube with brush is more convenient for toolboxes, service vehicles and site work.\u003c\/p\u003e","brand":"Excision","offers":[{"title":"Default Title","offer_id":48182860972183,"sku":"83905-500","price":55.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0301\/8663\/5399\/files\/xdp905-paste-compressed_720x_966ea9c8-11ec-4cc4-b39f-250dfe56136c.webp?v=1791766663","url":"https:\/\/www.weldingsupply.com.au\/products\/xdp905-cutting-paste-500g-tub","provider":"QWS - Welding Supply Solutions","version":"1.0","type":"link"}