{"product_id":"mig-torch-binzel-mb36-4mtr-evo-pro-50-deg","title":"MIG TORCH BINZEL MB36 4MTR EVO PRO 50 DEG","description":"\u003ch4 dir=\"ltr\"\u003e\n\u003cstrong\u003eBinzel MB EVO PRO 36 MIG Torch – 4m, Air-Cooled\u003c\/strong\u003e .\u003c\/h4\u003e\r\n\u003cp dir=\"ltr\"\u003eThe Binzel MB EVO PRO 36 is a 320 amp air-cooled MIG\/MAG torch with a Euro (KZ-2) central connector, built for daily fabrication and production welding with 0.8–1.2mm wire. It's rated at 320A on CO2 and 290A on mixed gases at a 60% duty cycle, with technical data stated to EN 60974-7. This 4m version (part no. 014.0530.1) is the middle length in the range and the most common choice on the shop floor, giving you reach around a jig or a larger fabrication without the feeding compromises of a 5m lead.\u003c\/p\u003e\r\n\u003cp dir=\"ltr\"\u003eWhat separates the EVO PRO from a standard MB 36 is weight and handling. Binzel's BIKOX® LW cable assembly is up to 34% lighter than the conventional cable, which matters more the longer the lead gets — the extra metre on a standard cable is weight you carry all shift. The two-component handle has a tapered profile, repositioned trigger and ball-joint cable support so the torch stays balanced overhead and out of position. The internal geometry keeps the grip cooler under load without giving up mechanical strength, and the fittings are built more robustly than the previous generation with extra room inside the handle for servicing.\u003c\/p\u003e\r\n\u003cp dir=\"ltr\"\u003eIt runs the proven MB 36 wear parts (tips, tip holders, gas diffusers and nozzles), so if you already stock MB 36 consumables, nothing changes.\u003c\/p\u003e\r\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eKey features\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul dir=\"ltr\"\u003e\r\n\u003cli\u003e320A CO2 \/ 290A mixed gas at 60% duty cycle\u003c\/li\u003e\r\n\u003cli\u003e4m lead — reach around larger jobs without leaving the bay\u003c\/li\u003e\r\n\u003cli\u003eBIKOX® LW cable assembly, up to 34% lighter than standard\u003c\/li\u003e\r\n\u003cli\u003eTwo-component ergonomic handle with tapered design and optimised trigger position\u003c\/li\u003e\r\n\u003cli\u003eCooler grip thanks to air-cooled internal geometry\u003c\/li\u003e\r\n\u003cli\u003eRobust, size-optimised Euro central connector (KZ-2)\u003c\/li\u003e\r\n\u003cli\u003eImproved handle access for easier servicing\u003c\/li\u003e\r\n\u003cli\u003eUses standard Binzel MB 36 wear parts\u003c\/li\u003e\r\n\u003cli\u003eAlso available in 3m (014.0529.1) and 5m (014.0531.1)\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cdiv dir=\"ltr\"\u003e\r\n\u003ctable\u003e\r\n\u003cthead\u003e\r\n\u003ctr\u003e\r\n\u003cth scope=\"col\"\u003eSpecification\u003c\/th\u003e\r\n\u003cth scope=\"col\"\u003eMB EVO PRO 36 (4m)\u003c\/th\u003e\r\n\u003c\/tr\u003e\r\n\u003c\/thead\u003e\r\n\u003ctbody\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003ePart number\u003c\/td\u003e\r\n\u003ctd\u003e014.0530.1\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eCooling\u003c\/td\u003e\r\n\u003ctd\u003eAir (gas) cooled\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eRating – CO2\u003c\/td\u003e\r\n\u003ctd\u003e320A\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eRating – mixed gas (M21)\u003c\/td\u003e\r\n\u003ctd\u003e290A\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eDuty cycle\u003c\/td\u003e\r\n\u003ctd\u003e60%\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eWire diameter\u003c\/td\u003e\r\n\u003ctd\u003e0.8 – 1.2mm\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eCable length\u003c\/td\u003e\r\n\u003ctd\u003e4m\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eCable type\u003c\/td\u003e\r\n\u003ctd\u003eBIKOX® LW (low weight)\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eConnection\u003c\/td\u003e\r\n\u003ctd\u003eEuro central connector (KZ-2)\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eSwan neck\u003c\/td\u003e\r\n\u003ctd\u003e50°\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eTechnical data to\u003c\/td\u003e\r\n\u003ctd\u003eEN 60974-7\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003c\/tbody\u003e\r\n\u003c\/table\u003e\r\n\u003c\/div\u003e\r\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eFrequently asked questions\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eWhat amperage is the Binzel MB EVO PRO 36 rated to?\u003c\/strong\u003e\u003cbr\u003e 320A with CO2 and 290A with mixed shielding gases, both at a 60% duty cycle. The rating is the same across all three lead lengths.\u003c\/p\u003e\r\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eShould I get the 3m, 4m or 5m?\u003c\/strong\u003e\u003cbr\u003e 4m is the usual pick for general fabrication — enough reach to move around a job without dragging the machine, but still short enough to feed reliably. Go to 3m if you're welding close to the machine or running soft wire like aluminium, and 5m only if you genuinely need the reach.\u003c\/p\u003e\r\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eDoes a longer lead affect wire feeding?\u003c\/strong\u003e\u003cbr\u003e It can. Every extra metre adds friction in the liner, which matters most with soft or small-diameter wire. At 4m with 0.8–1.2mm steel wire you shouldn't have issues, provided the liner is the right size, trimmed correctly and kept clean.\u003c\/p\u003e\r\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eWill it fit my welder?\u003c\/strong\u003e\u003cbr\u003e It has a standard Euro connection, so it fits most Euro-style MIG machines and wire feeders, including Kemppi, Fronius, UNIMIG, CIGWELD, WIA and Lincoln units with a Euro outlet. Check that your machine's output suits a 320A-class torch.\u003c\/p\u003e\r\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eIs this torch water-cooled?\u003c\/strong\u003e\u003cbr\u003e No. The MB EVO PRO 36 is air-cooled (gas-cooled). Binzel also makes liquid-cooled models in the EVO PRO range if you need one — give us a call and we'll match it to your machine.\u003c\/p\u003e\r\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eDo standard MB 36 consumables fit?\u003c\/strong\u003e\u003cbr\u003e Yes. Contact tips, tip holders, diffusers and nozzles are the standard MB 36 pattern.\u003c\/p\u003e\r\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eWhat does \"MB36KD\" mean?\u003c\/strong\u003e\u003cbr\u003e It's a supplier shorthand for the MB 36 torch with the standard central (Euro) connection. The genuine Binzel part number is 014.0530.1.\u003c\/p\u003e\r\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eChoosing your lead length\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cdiv dir=\"ltr\"\u003e\r\n\u003ctable\u003e\r\n\u003cthead\u003e\r\n\u003ctr\u003e\r\n\u003cth scope=\"col\"\u003e3m\u003c\/th\u003e\r\n\u003cth scope=\"col\"\u003e\u003cstrong\u003e4m\u003c\/strong\u003e\u003c\/th\u003e\r\n\u003cth scope=\"col\"\u003e5m\u003c\/th\u003e\r\n\u003c\/tr\u003e\r\n\u003c\/thead\u003e\r\n\u003ctbody\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003ePart number\u003c\/td\u003e\r\n\u003ctd\u003e014.0529.1\u003c\/td\u003e\r\n\u003ctd\u003e\u003cstrong\u003e014.0530.1\u003c\/strong\u003e\u003c\/td\u003e\r\n\u003ctd\u003e014.0531.1\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eRating (CO2 \/ mixed)\u003c\/td\u003e\r\n\u003ctd\u003e320A \/ 290A\u003c\/td\u003e\r\n\u003ctd\u003e\u003cstrong\u003e320A \/ 290A\u003c\/strong\u003e\u003c\/td\u003e\r\n\u003ctd\u003e320A \/ 290A\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eDuty cycle\u003c\/td\u003e\r\n\u003ctd\u003e60%\u003c\/td\u003e\r\n\u003ctd\u003e\u003cstrong\u003e60%\u003c\/strong\u003e\u003c\/td\u003e\r\n\u003ctd\u003e60%\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eBest for\u003c\/td\u003e\r\n\u003ctd\u003eBench and bay work, aluminium and soft wire\u003c\/td\u003e\r\n\u003ctd\u003e\u003cstrong\u003eGeneral fabrication — the all-rounder\u003c\/strong\u003e\u003c\/td\u003e\r\n\u003ctd\u003eLarge fabrications, working away from the machine\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003c\/tbody\u003e\r\n\u003c\/table\u003e\r\n\u003c\/div\u003e","brand":"GENUINE BINZEL","offers":[{"title":"Default Title","offer_id":48106364993687,"sku":"014.0530.1","price":514.77,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0301\/8663\/5399\/files\/014_0530_1_0_0_2.png?v=1789623136","url":"https:\/\/www.weldingsupply.com.au\/products\/mig-torch-binzel-mb36-4mtr-evo-pro-50-deg","provider":"QWS - Welding Supply Solutions","version":"1.0","type":"link"}