{"product_id":"mig-torch-binzel-mb25-4mtr-evo-pro","title":"MIG TORCH BINZEL MB25 4MTR EVO PRO","description":"\u003ch3 dir=\"ltr\"\u003eBinzel MB EVO PRO 25 MIG Torch – 4m, Air-Cooled (004.0672.1)\u003c\/h3\u003e\r\n\u003cp dir=\"ltr\"\u003eThe Binzel MB EVO PRO 25 is a 230 amp air-cooled MIG\/MAG torch with a Euro (KZ-2) central connector, sitting between the light-duty MB 15 and the heavy-duty MB 36 in the EVO PRO range. It's rated at 230A on CO2 and 200A on mixed gases at a 60% duty cycle, running 0.8–1.2mm wire, with technical data stated to EN 60974-7. This 4m version (part no. 004.0672.1) is the most popular length on the shop floor — enough reach to work around a jig or a larger weldment without leaving the machine behind.\u003c\/p\u003e\r\n\u003cp dir=\"ltr\"\u003eIf you're running a 180–250A machine, the MB 25 is usually the right match. The MB 15 tops out at 180A and won't take 1.2mm wire, while the MB 36 is more torch than a 200A machine needs — heavier in the hand and more expensive to consumable. The 25 gives you 1.2mm capability and headroom to the top of your machine's range without the extra bulk.\u003c\/p\u003e\r\n\u003cp dir=\"ltr\"\u003eAt 4m, weight matters more than it does on a short lead, and that's where the EVO PRO earns its keep. Binzel's BIKOX® LW cable assembly is up to 34% lighter than the conventional cable, so the extra metre isn't extra drag on your wrist all shift. The two-component handle has a tapered profile, repositioned trigger and ball-joint cable support so the torch stays balanced overhead and out of position, and the internal geometry keeps the grip cooler under load without giving up mechanical strength.\u003c\/p\u003e\r\n\u003cp dir=\"ltr\"\u003eIt runs the proven MB 25 wear parts, so if you already stock them nothing changes.\u003c\/p\u003e\r\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eKey features\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul dir=\"ltr\"\u003e\r\n\u003cli\u003e230A CO2 \/ 200A mixed gas at 60% duty cycle\u003c\/li\u003e\r\n\u003cli\u003e4m lead — reach around larger jobs without moving the machine\u003c\/li\u003e\r\n\u003cli\u003eHandles 0.8mm through to 1.2mm wire\u003c\/li\u003e\r\n\u003cli\u003eBIKOX® LW cable assembly, up to 34% lighter than standard\u003c\/li\u003e\r\n\u003cli\u003eTwo-component ergonomic handle with tapered design and optimised trigger position\u003c\/li\u003e\r\n\u003cli\u003eCooler grip thanks to air-cooled internal geometry\u003c\/li\u003e\r\n\u003cli\u003eRobust, size-optimised Euro central connector (KZ-2)\u003c\/li\u003e\r\n\u003cli\u003e50° swan neck (replacement part 004.0663.1)\u003c\/li\u003e\r\n\u003cli\u003eUses standard Binzel MB 25 wear parts\u003c\/li\u003e\r\n\u003cli\u003eAlso available in 3m (004.0671.1) and 5m (004.0673.1)\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cdiv dir=\"ltr\"\u003e\r\n\u003ctable\u003e\r\n\u003cthead\u003e\r\n\u003ctr\u003e\r\n\u003cth scope=\"col\"\u003eSpecification\u003c\/th\u003e\r\n\u003cth scope=\"col\"\u003eMB EVO PRO 25 (4m)\u003c\/th\u003e\r\n\u003c\/tr\u003e\r\n\u003c\/thead\u003e\r\n\u003ctbody\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003ePart number\u003c\/td\u003e\r\n\u003ctd\u003e004.0672.1\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eCooling\u003c\/td\u003e\r\n\u003ctd\u003eAir (gas) cooled\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eRating – CO2\u003c\/td\u003e\r\n\u003ctd\u003e230A\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eRating – mixed gas (M21)\u003c\/td\u003e\r\n\u003ctd\u003e200A\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eDuty cycle\u003c\/td\u003e\r\n\u003ctd\u003e60%\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eWire diameter\u003c\/td\u003e\r\n\u003ctd\u003e0.8 – 1.2mm\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eCable length\u003c\/td\u003e\r\n\u003ctd\u003e4m\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eCable type\u003c\/td\u003e\r\n\u003ctd\u003eBIKOX® LW (low weight)\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eConnection\u003c\/td\u003e\r\n\u003ctd\u003eEuro central connector (KZ-2)\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eSwan neck\u003c\/td\u003e\r\n\u003ctd\u003e50°\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eContact tip thread\u003c\/td\u003e\r\n\u003ctd\u003eM6\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eTechnical data to\u003c\/td\u003e\r\n\u003ctd\u003eEN 60974-7\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003c\/tbody\u003e\r\n\u003c\/table\u003e\r\n\u003c\/div\u003e\r\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eCommon wear parts\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cdiv dir=\"ltr\"\u003e\r\n\u003ctable\u003e\r\n\u003cthead\u003e\r\n\u003ctr\u003e\r\n\u003cth scope=\"col\"\u003ePart\u003c\/th\u003e\r\n\u003cth scope=\"col\"\u003eBinzel number\u003c\/th\u003e\r\n\u003c\/tr\u003e\r\n\u003c\/thead\u003e\r\n\u003ctbody\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eGas nozzle, cylindrical Ø18\u003c\/td\u003e\r\n\u003ctd\u003e145.0042\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eGas nozzle, conical Ø15\u003c\/td\u003e\r\n\u003ctd\u003e145.0076\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eGas nozzle, tapered Ø11.5\u003c\/td\u003e\r\n\u003ctd\u003e145.0124\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eContact tip E-Cu 0.8mm (M6)\u003c\/td\u003e\r\n\u003ctd\u003e140.0051\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eContact tip E-Cu 1.0mm (M6)\u003c\/td\u003e\r\n\u003ctd\u003e140.0242\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eContact tip E-Cu 1.2mm (M6)\u003c\/td\u003e\r\n\u003ctd\u003e140.0379\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eSwan neck, 50°\u003c\/td\u003e\r\n\u003ctd\u003e004.0663.1\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eBIKOX® LW power cable, 4m\u003c\/td\u003e\r\n\u003ctd\u003e160.H033.1\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003c\/tbody\u003e\r\n\u003c\/table\u003e\r\n\u003c\/div\u003e\r\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eFrequently asked questions\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eWhat amperage is the Binzel MB EVO PRO 25 rated to?\u003c\/strong\u003e\u003cbr\u003e 230A with CO2 and 200A with mixed shielding gases, both at a 60% duty cycle. The rating is the same across all three lead lengths.\u003c\/p\u003e\r\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eShould I get the 3m, 4m or 5m?\u003c\/strong\u003e\u003cbr\u003e 4m is the usual pick for general fabrication — enough reach to move around a job, still short enough to feed reliably. Go to 3m if you're welding close to the machine or running aluminium, and 5m only if you genuinely need the reach.\u003c\/p\u003e\r\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eDoes the longer lead affect wire feeding?\u003c\/strong\u003e\u003cbr\u003e It can. Every extra metre adds friction in the liner, which matters most with soft or small-diameter wire. At 4m with 0.8–1.2mm steel wire you shouldn't have issues, provided the liner is the right size, trimmed correctly and kept clean.\u003c\/p\u003e\r\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eWhat size machine suits an MB 25 torch?\u003c\/strong\u003e\u003cbr\u003e Machines in the 180–250A range. Above that, or for all-day heavy section work, step up to the MB 36 (320A). For 0.6–1.0mm wire on a small single-phase unit, the MB 15 (180A) will do.\u003c\/p\u003e\r\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eWill it fit my welder?\u003c\/strong\u003e\u003cbr\u003e It has a standard Euro connection, so it fits most Euro-style MIG machines and wire feeders, including Kemppi, Fronius, UNIMIG, CIGWELD, WIA and Lincoln units with a Euro outlet.\u003c\/p\u003e\r\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eDo MB 36 consumables fit the MB 25?\u003c\/strong\u003e\u003cbr\u003e No. The MB 25 uses M6 contact tips and its own nozzle sizes, while the MB 36 uses a larger M8 tip and bigger nozzles. Order MB 25 parts specifically.\u003c\/p\u003e\r\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eIs this torch water-cooled?\u003c\/strong\u003e\u003cbr\u003e No, it's air-cooled (gas-cooled). Binzel makes liquid-cooled models in the EVO PRO range from 325A up if you need one.\u003c\/p\u003e\r\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eChoosing your lead length\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cdiv dir=\"ltr\"\u003e\r\n\u003ctable\u003e\r\n\u003cthead\u003e\r\n\u003ctr\u003e\r\n\u003cth scope=\"col\"\u003e3m\u003c\/th\u003e\r\n\u003cth scope=\"col\"\u003e\u003cstrong\u003e4m\u003c\/strong\u003e\u003c\/th\u003e\r\n\u003cth scope=\"col\"\u003e5m\u003c\/th\u003e\r\n\u003c\/tr\u003e\r\n\u003c\/thead\u003e\r\n\u003ctbody\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003ePart number\u003c\/td\u003e\r\n\u003ctd\u003e004.0671.1\u003c\/td\u003e\r\n\u003ctd\u003e\u003cstrong\u003e004.0672.1\u003c\/strong\u003e\u003c\/td\u003e\r\n\u003ctd\u003e004.0673.1\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eRating (CO2 \/ mixed)\u003c\/td\u003e\r\n\u003ctd\u003e230A \/ 200A\u003c\/td\u003e\r\n\u003ctd\u003e\u003cstrong\u003e230A \/ 200A\u003c\/strong\u003e\u003c\/td\u003e\r\n\u003ctd\u003e230A \/ 200A\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eDuty cycle\u003c\/td\u003e\r\n\u003ctd\u003e60%\u003c\/td\u003e\r\n\u003ctd\u003e\u003cstrong\u003e60%\u003c\/strong\u003e\u003c\/td\u003e\r\n\u003ctd\u003e60%\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eBest for\u003c\/td\u003e\r\n\u003ctd\u003eBench and bay work, aluminium and soft wire\u003c\/td\u003e\r\n\u003ctd\u003e\u003cstrong\u003eGeneral fabrication — the all-rounder\u003c\/strong\u003e\u003c\/td\u003e\r\n\u003ctd\u003eLarge fabrications, working away from the machine\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003c\/tbody\u003e\r\n\u003c\/table\u003e\r\n\u003c\/div\u003e","brand":"BINZEL","offers":[{"title":"Default Title","offer_id":48106364895383,"sku":"004.0672.1","price":215.41,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0301\/8663\/5399\/files\/100000088721.jpg?v=1789624830","url":"https:\/\/www.weldingsupply.com.au\/products\/mig-torch-binzel-mb25-4mtr-evo-pro","provider":"QWS - Welding Supply Solutions","version":"1.0","type":"link"}