{"product_id":"mig-torch-binzel-mb24-4mtr-evo-pro","title":"MIG TORCH BINZEL MB24 4MTR EVO PRO","description":"\u003ch4 dir=\"ltr\"\u003e\u003cstrong\u003eBinzel MB EVO PRO 24 MIG Torch – 4m, Air-Cooled\u003c\/strong\u003e\u003c\/h4\u003e\r\n\u003cp dir=\"ltr\"\u003eThe Binzel MB EVO PRO 24 is a 250 amp air-cooled MIG\/MAG torch with a Euro (KZ-2) central connector, built for steady production work on 250-class machines. It's rated at 250A on CO2 and 220A on mixed gases at a 60% duty cycle, running 0.8–1.2mm wire, with technical data stated to EN 60974-7. This 4m version (part no. 012.0372.1) is the most-specified length for general fabrication — enough lead to work around a jig or a larger weldment without shifting the machine.\u003c\/p\u003e\r\n\u003cp dir=\"ltr\"\u003eThe MB 24 is the workhorse of the mid-range EVO PRO torches. If your machine sits around the 250A mark and you're welding 1.0–1.2mm wire day in, day out, it's the natural fit: more headroom than the MB 25 (230A), lighter and cheaper to consumable than the MB 36 (320A).\u003c\/p\u003e\r\n\u003cp dir=\"ltr\"\u003eAt 4m, cable weight is what you notice by the end of a shift. Binzel's BIKOX® LW cable assembly is up to 34% lighter than the conventional cable, so the extra metre isn't extra drag on your wrist. The two-component handle has a tapered profile, repositioned trigger and ball-joint cable support so the torch stays balanced overhead and out of position, and the internal geometry keeps the grip cooler under load without giving up mechanical strength.\u003c\/p\u003e\r\n\u003cp dir=\"ltr\"\u003eIt runs the proven MB 24 wear parts, so if you already stock them nothing changes.\u003c\/p\u003e\r\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eKey features\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul dir=\"ltr\"\u003e\r\n\u003cli\u003e250A CO2 \/ 220A mixed gas at 60% duty cycle\u003c\/li\u003e\r\n\u003cli\u003e4m lead — reach around larger jobs without moving the machine\u003c\/li\u003e\r\n\u003cli\u003eHandles 0.8mm through to 1.2mm wire\u003c\/li\u003e\r\n\u003cli\u003eBIKOX® LW cable assembly, up to 34% lighter than standard\u003c\/li\u003e\r\n\u003cli\u003eTwo-component ergonomic handle with tapered design and optimised trigger position\u003c\/li\u003e\r\n\u003cli\u003eCooler grip thanks to air-cooled internal geometry\u003c\/li\u003e\r\n\u003cli\u003eRobust, size-optimised Euro central connector (KZ-2)\u003c\/li\u003e\r\n\u003cli\u003e50° swan neck (replacement part 012.0374.1)\u003c\/li\u003e\r\n\u003cli\u003eM6 contact tip thread\u003c\/li\u003e\r\n\u003cli\u003eUses standard Binzel MB 24 wear parts\u003c\/li\u003e\r\n\u003cli\u003eAlso available in 3m (012.0371.1) and 5m (012.0373.1)\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cdiv dir=\"ltr\"\u003e\r\n\u003ctable\u003e\r\n\u003cthead\u003e\r\n\u003ctr\u003e\r\n\u003cth scope=\"col\"\u003eSpecification\u003c\/th\u003e\r\n\u003cth scope=\"col\"\u003eMB EVO PRO 24 (4m)\u003c\/th\u003e\r\n\u003c\/tr\u003e\r\n\u003c\/thead\u003e\r\n\u003ctbody\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003ePart number\u003c\/td\u003e\r\n\u003ctd\u003e012.0372.1\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eCooling\u003c\/td\u003e\r\n\u003ctd\u003eAir (gas) cooled\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eRating – CO2\u003c\/td\u003e\r\n\u003ctd\u003e250A\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eRating – mixed gas (M21)\u003c\/td\u003e\r\n\u003ctd\u003e220A\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eDuty cycle\u003c\/td\u003e\r\n\u003ctd\u003e60%\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eWire diameter\u003c\/td\u003e\r\n\u003ctd\u003e0.8 – 1.2mm\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eCable length\u003c\/td\u003e\r\n\u003ctd\u003e4m\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eCable type\u003c\/td\u003e\r\n\u003ctd\u003eBIKOX® LW (low weight)\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eConnection\u003c\/td\u003e\r\n\u003ctd\u003eEuro central connector (KZ-2)\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eSwan neck\u003c\/td\u003e\r\n\u003ctd\u003e50°\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eContact tip thread\u003c\/td\u003e\r\n\u003ctd\u003eM6\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eTechnical data to\u003c\/td\u003e\r\n\u003ctd\u003eEN 60974-7\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003c\/tbody\u003e\r\n\u003c\/table\u003e\r\n\u003c\/div\u003e\r\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eService parts\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003ctable\u003e\r\n\u003cthead\u003e\r\n\u003ctr\u003e\r\n\u003cth scope=\"col\"\u003ePart\u003c\/th\u003e\r\n\u003cth scope=\"col\"\u003eBinzel number\u003c\/th\u003e\r\n\u003c\/tr\u003e\r\n\u003c\/thead\u003e\r\n\u003ctbody\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eSwan neck, 50°\u003c\/td\u003e\r\n\u003ctd\u003e012.0374.1\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eBIKOX® LW power cable, R37, 4m\u003c\/td\u003e\r\n\u003ctd\u003e160.1331.1\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eHandle, 2-component, 2-pole complete\u003c\/td\u003e\r\n\u003ctd\u003e180.0176.1\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eErgonomic trigger, 2-pole\u003c\/td\u003e\r\n\u003ctd\u003e185.0142.1\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eSpare parts \/ consumables kit\u003c\/td\u003e\r\n\u003ctd\u003eSK012.0000 [verify]\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003c\/tbody\u003e\r\n\u003c\/table\u003e\r\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eFrequently asked questions\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eWhat amperage is the Binzel MB EVO PRO 24 rated to?\u003c\/strong\u003e\u003cbr\u003e 250A with CO2 and 220A with mixed shielding gases, both at a 60% duty cycle. The rating is the same across all three lead lengths.\u003c\/p\u003e\r\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eWhat size machine suits an MB 24 torch?\u003c\/strong\u003e\u003cbr\u003e It's matched to machines in the 200–250A range. If you're regularly welding heavy section at higher output, step up to the MB 36 (320A). For lighter work on a small single-phase unit, look at the MB 25 (230A) or MB 15 (180A).\u003c\/p\u003e\r\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eWhat's the difference between the MB 24, MB 25 and MB 26?\u003c\/strong\u003e\u003cbr\u003e They're three points on the same scale — 250A, 230A and 270A respectively — all air-cooled, all 0.8–1.2mm wire, all 60% duty. Which one you want usually comes down to which consumables your workshop already runs. They don't share wear parts, so it pays to standardise.\u003c\/p\u003e\r\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eShould I get the 3m, 4m or 5m?\u003c\/strong\u003e\u003cbr\u003e 4m is the usual pick for general fabrication — enough reach to move around a job, still short enough to feed reliably. Go to 3m if you're welding close to the machine or running aluminium, and 5m only if you genuinely need the reach.\u003c\/p\u003e\r\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eDoes the longer lead affect wire feeding?\u003c\/strong\u003e\u003cbr\u003e It can. Every extra metre adds friction in the liner, which matters most with soft or small-diameter wire. At 4m with 0.8–1.2mm steel wire you shouldn't have issues, provided the liner is the right size, trimmed correctly and kept clean.\u003c\/p\u003e\r\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eWill it fit my welder?\u003c\/strong\u003e\u003cbr\u003e It has a standard Euro connection, so it fits most Euro-style MIG machines and wire feeders, including Kemppi, Fronius, UNIMIG, CIGWELD, WIA and Lincoln units with a Euro outlet.\u003c\/p\u003e\r\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eIs this torch water-cooled?\u003c\/strong\u003e\u003cbr\u003e No, it's air-cooled (gas-cooled). Binzel makes liquid-cooled models in the EVO PRO range from 325A up if you need one.\u003c\/p\u003e\r\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eWhich air-cooled EVO PRO torch do I need?\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cdiv dir=\"ltr\"\u003e\r\n\u003ctable\u003e\r\n\u003cthead\u003e\r\n\u003ctr\u003e\r\n\u003cth scope=\"col\"\u003eMB EVO PRO 15\u003c\/th\u003e\r\n\u003cth scope=\"col\"\u003eMB EVO PRO 25\u003c\/th\u003e\r\n\u003cth scope=\"col\"\u003e\u003cstrong\u003eMB EVO PRO 24\u003c\/strong\u003e\u003c\/th\u003e\r\n\u003cth scope=\"col\"\u003eMB EVO PRO 26\u003c\/th\u003e\r\n\u003cth scope=\"col\"\u003eMB EVO PRO 36\u003c\/th\u003e\r\n\u003c\/tr\u003e\r\n\u003c\/thead\u003e\r\n\u003ctbody\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eRating CO2\u003c\/td\u003e\r\n\u003ctd\u003e180A\u003c\/td\u003e\r\n\u003ctd\u003e230A\u003c\/td\u003e\r\n\u003ctd\u003e\u003cstrong\u003e250A\u003c\/strong\u003e\u003c\/td\u003e\r\n\u003ctd\u003e270A\u003c\/td\u003e\r\n\u003ctd\u003e320A\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eRating mixed gas (M21)\u003c\/td\u003e\r\n\u003ctd\u003e150A\u003c\/td\u003e\r\n\u003ctd\u003e200A\u003c\/td\u003e\r\n\u003ctd\u003e\u003cstrong\u003e220A\u003c\/strong\u003e\u003c\/td\u003e\r\n\u003ctd\u003e240A\u003c\/td\u003e\r\n\u003ctd\u003e290A\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eDuty cycle\u003c\/td\u003e\r\n\u003ctd\u003e60%\u003c\/td\u003e\r\n\u003ctd\u003e60%\u003c\/td\u003e\r\n\u003ctd\u003e\u003cstrong\u003e60%\u003c\/strong\u003e\u003c\/td\u003e\r\n\u003ctd\u003e60%\u003c\/td\u003e\r\n\u003ctd\u003e60%\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003eWire range\u003c\/td\u003e\r\n\u003ctd\u003e0.6–1.0mm\u003c\/td\u003e\r\n\u003ctd\u003e0.8–1.2mm\u003c\/td\u003e\r\n\u003ctd\u003e\u003cstrong\u003e0.8–1.2mm\u003c\/strong\u003e\u003c\/td\u003e\r\n\u003ctd\u003e0.8–1.2mm\u003c\/td\u003e\r\n\u003ctd\u003e0.8–1.2mm\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003e4m part no.\u003c\/td\u003e\r\n\u003ctd\u003e002.0710.1\u003c\/td\u003e\r\n\u003ctd\u003e004.0672.1\u003c\/td\u003e\r\n\u003ctd\u003e\u003cstrong\u003e012.0372.1\u003c\/strong\u003e\u003c\/td\u003e\r\n\u003ctd\u003e018.0212.1\u003c\/td\u003e\r\n\u003ctd\u003e014.0530.1\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003c\/tbody\u003e\r\n\u003c\/table\u003e\r\n\u003c\/div\u003e","brand":"BINZEL","offers":[{"title":"Default Title","offer_id":48106364928151,"sku":"012.0372.1","price":401.12,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0301\/8663\/5399\/files\/14333-MB-EVO-PRO-15-MIG-Torch-scaled.jpg?v=1789690389","url":"https:\/\/www.weldingsupply.com.au\/products\/mig-torch-binzel-mb24-4mtr-evo-pro","provider":"QWS - Welding Supply Solutions","version":"1.0","type":"link"}